Toyota 86 ZN6 Electronics
BLITZ
BLITZ
Oil Temp and Pressure Sensor Attachment
An attachment used when attaching the TEMP sensor and PRESS sensor to the oil filter in a sandwich fashion. The center bolt includes both 3 / 4-16 and M20-P1.5 (Type H is only for M20-P1.5). O-rings are compatible with both 65mm and 70mm sizes (Type H is only 65mm size). A 1 / 8PT hole is set in the sensor mounting part. There are three locations, and the mounting position can be changed depending on the model
The Type H has a high attachment so that the sensor can be attached to the oil filter part of the Toyota 86.
VEHICLE: Toyota 86 / BRZ 2013-2020
PART#: 19242
DETAILS/PHOTOS: www.blitz.co.jp/..
Text Message +1.860.809.0907 for VIP Pricing 24/7
Oil Temp and Pressure Sensor Attachment
An attachment used when attaching the TEMP sensor and PRESS sensor to the oil filter in a sandwich fashion. The center bolt includes both 3 / 4-16 and M20-P1.5 (Type H is only for M20-P1.5). O-rings are compatible with both 65mm and 70mm sizes (Type H is only 65mm size). A 1 / 8PT hole is set in the sensor mounting part. There are three locations, and the mounting position can be changed depending on the model
The Type H has a high attachment so that the sensor can be attached to the oil filter part of the Toyota 86.
VEHICLE: Toyota 86 / BRZ 2013-2020
PART#: 19242
DETAILS/PHOTOS: www.blitz.co.jp/..
Text Message +1.860.809.0907 for VIP Pricing 24/7
Embed into Forums:
| Related Products | |||||||||||||||||||||||||||||||||||
|
